There are also tricks in operating glass cleaners. In addition to cleaning, good glass needs to be dried.
Drying the glass is very simple, just open the various buttons in order. Turn on the switch first and turn on the cleaning rotation and blower system ten minutes before cleaning the glass. Turn the pump off before the controller turns and then start working, so operating the glass washer is more professional.
When the glass is lifted to the transfer roller, the automatic cleaning has already started. When the work is completed, do not turn off the blower immediately. It is better to wait for ten minutes to close. This gives the glass washer a cooling time and maintenance of the machine. It is good. If you are in a hurry, it doesn't matter. It's better to wait ten minutes.
Another trick is to place the glass. In fact, the operation requirements of the glass washer are not high. The main reason is that the water system should pay attention to it. If there is a fault, stop the machine immediately, then clean the water in the tank. Remove it for inspection. The main reason for the failure of the waterway system is that no water is discharged to the water tank after the work is completed. If the water tank is not drained in a very cold weather, it is very easy to damage the water tank. At the same time, it is recommended to clean the sealed filter once every two months. If there is a blockage, you only need to clean the water pipe.
The operation of the glass washer is very simple. In addition to mastering these few tips, it is difficult to clean the cleaned glass cloth. Of course, the quality of the glass washer is also very important. Choosing a cost-effective machine can help save a lot of manpower and material resources.
Waterproof Seam Tape Sewing,Waterproof Jacket Seam Tape,Waterproof Tape For Tent Seams,Waterproof Tape For Clothing Seams
NEW POWER INDUSTRIAL Co., Ltd , https://www.newpowerhk.com