With the development of aerospace, automotive, home appliances, and scientific research fields, high and low temperature alternating heat and humidity test chambers have been widely used. The more the equipment is used, the more wear and tear of the equipment components and the aging of the equipment, which affects the accuracy of the test and shortens the working life. After the test, a simple three-step cleaning step will keep the equipment lasting:
1. Discharge the remaining water in the water tank to avoid scaling of the water tank and make the water tank reach a longer life.
2, used wet ball gauze to remove, if the gauze appears yellow, hard to replace the new wet ball gauze; if the gauze is still intact, can be cleaned and dried to continue to use next time, not only save gauze but also protect the humidity sensor; Then use a clean soft cloth to wipe the water vapor or stain in the working room. If the working room is large and inconvenient to clean manually, you can also directly use the high temperature function of the high and low temperature alternating heat and humidity test chamber. Set the 50 degree high temperature barbecue for half an hour.
3. Open the windshield under the studio (the new equipment can be opened directly, the old equipment should be opened with a plum blossom screwdriver), and the dust deposited on the surface should be cleaned with a vacuum cleaner or a dry rag.
Note: Cleaning is better after half an hour of stop working in the high and low temperature alternating heat and humidity test chamber, because the refrigeration system will have a certain temperature after use, so as not to burn the operator.
Casual T Shirt,V Neck T Shirt,T Shirt Round Neck,Crew Neck Shirt
Guangzhou LIDONG Garment Industrial Co., Ltd. , https://www.lidongsports.com