[China Glass Net] shower room, separate shower cubicle, modern homes have higher and higher requirements for bathroom facilities. Many families want to have a separate bath space, but because of the limited space in the room, only bathing facilities can be Sanitary ware is placed in one room. The shower room makes full use of the corner of the room, and the shower area is clearly divided by a fence to form a relatively independent bathing space.
When cleaning the walls and bottom of the shower, use a soft, dry cloth. If there is slight dirt, please use a soft cloth or sponge to clean with a neutral detergent. When removing stubborn dirt, please remove it with alcohol.
When using the bathroom-specific detergent, be sure to use it properly in accordance with the precautions stated on its container. Incorrect use can cause adverse effects on the human body and can easily cause some undesirable conditions in the product.
Do not use the following items for cleaning: acidic, alkaline solvents, drugs (such as hydrochloric acid), acetone diluents and other solvents, decontamination powder, etc., otherwise it will have adverse effects on the human body, and will cause some adverse conditions.
Shower room maintenance
Use and maintenance of the pulley
1. Push-pull shower door, currently has two methods: sliding block and sliding wheel.
2, pulleys, sliders should pay attention to the problems in use:
A. Avoid slamming the movable door below to avoid causing the movable door to fall off;
B. Pay attention to regularly clean the slide rails, pulleys and sliders, and add lubricant (lubricating oil or lubricating wax);
C. Regularly adjust the adjusting screw of the slider to ensure the effective bearing and good sliding of the sliding door to the movable door.
Tempered glass maintenance
1. Do not hit or hit the glass surface with sharp objects to avoid damage.
2, do not use the watery corrosive liquid to wipe the glass surface, so as not to damage the surface gloss;
3. Do not use a rough material to wipe the glass surface to avoid scratches.
Maintenance of aluminum alloy frame
Electrostatic spraying products (refer to solid sprays such as white, bone, blue, yellow, red, purple, etc.):
1. It is necessary to prevent the direct sunlight and the explosion of sunlight, because the resin material and the color base powder will be photosensitive, which causes the sprayed layer to fade;
2, can not be wiped with corrosive liquids or materials;
3. Do not wipe the surface with rough materials (including toothpaste);
4. You cannot use sharp objects to describe the surface. If there is stain on the surface of the aluminum, please wipe it with a neutral wash and clean water.
Oxidation and coloring products ( referred to as surface coloring such as gold, silver, silver, brushed silver):
1. These products are not easy to fade with respect to electrostatic coating products, but their hardness is poor, so in particular, it is not possible to wipe the surface with rough materials, and it is impossible to describe the surface with sharp objects.
2. If there is stain on the surface of the aluminum, please wipe it with a neutral wash and clean water.
Dress Shirts,Dress Shirts Men Long Sleeve,Dress Shirts Men Formal,100% Cotton Dress Shirt
Shaoxing Haoshun Trade Co.,Ltd. , https://www.sx-haoshun.com