[China Glass Net] Brick and ceramic tile curtain wall cleaning: use "calcified detergent" (diluted by 1:10 or 1:5 ratio), neutral all-purpose cleaner (diluted by 1:50), "wall tiles" Cleaner" and "cement slurry cleaner". Then use these four cleaning agents to select a small sample cleaning experiment on the surface of the external wall to determine the degree of dilution of the Qinghao agent and which is more suitable for this wall. Then, the drum is immersed in the diluted water of the cleaning agent to be soaked, and then taken out on the outer wall brick surface and the ceramic mosaic tile for cleaning. Wipe back and forth until the stain is removed and rinse with water. It can be repeated until the wall is clean.
Metal (stainless steel) curtain wall cleaning: stainless steel is generally used on the outer wall or bottom, and different cleaning methods are required for different positions. For the upper part, apply a neutral special cleaner and dilute 1:50. Sample cleaning is performed prior to cleaning to determine the dilution ratio. Then soak the wiper and the roller, then wipe with a soaked water wiper and roller to remove the dirt from the outer wall. For the bottom stainless steel, soak the rag with diluted cleaning water, then wipe with a rag, then scrape the sewage with a wiper, and repeat it until it is clean.
Aluminum plate (aluminum alloy) curtain wall cleaning: The aluminum alloy outer wall material is suitable for neutral all-purpose cleaner, and the ratio is also 1:50 debugging. Perform a small area cleaning test. Then, immerse the wiper and the roller in the tested clean water, and then repeatedly roll and clean the surface of the aluminum alloy with a water wiper and a roller. While washing, wipe the sewage with a wiper to clean the stone (granite) curtain wall: the granite is stone. To use the Calcified Cleaner, dilute 1:10 or 1:5. Also carry out a small area cleaning experiment, then soak the drum in it, and then wipe it with a roller dipped in clean water. Because the stone is generally used at the bottom of the outer wall, it is a part of the outer wall that is more dirty and harder to clean. . Repeat the wiping until the exterior wall is clean. Rinse with water. If there is still residual dirt, repeat the cleaning again.
Glass curtain wall cleaning: For glass exterior walls, the cleaning method is slightly different. First check that all security measures are in order. Then, the staff will use the hanging blue or hanging plate to hang on the outer wall to be cleaned. The construction personnel first check the glass to see if there is any adhesive, and if necessary, use a scraper or solvent to remove it. Looking at the staininess of the glass, tools such as brushes, grinding discs, scouring pads, and squeegees are available for the operator to choose. After each cleaning, slide the hanging plate or hang the blue, and lower the height to clean the next place.
shaoxing zhentu trading co;ltd , https://www.zhentutextile.com